How to use vacuum oil filter
How to use vacuum oil filter
The market share of vacuum oil filter is getting lower and lower. Traditional oil mills are still using vacuum oil filters. The vacuum oil filter does not require oil temperature. Suitable for cooked and raw squeezed use. The vacuum oil filter has filter cloth or screen. What is the use of vacuum oil filter? How to operate the vacuum oil filter correctly.
1. Check whether the vacuum oil filter part is loose and leaking. After the inspection, start the whole machine, first start the heating tube, set the temperature between 120 and 160 degrees, the heating time is 15 minutes, press the chamber Between 120-60 degrees, the red indicator light.
2. When the screw oil press is operating normally, open valve 2 and close the rest. Then add 70 degree crude oil, which can use the vacuum pump and the oil cylinder will begin to filter. Observe the oil position during the filter. If the position of the oil reaches one third, it is necessary to close valve 2 and open 4 valves again. After repeating the above actions, open valves 1 and 5 by analogy to prepare for draining oil.
3. According to the above operation process, the two oil tanks can be used in turn. Observe the oil tank during use. If you see oil foam in the oil tank, you must open the air valve in time to try to drain the oil foam to prevent it from entering the vacuum pump. in. No air will enter inside, ensuring a vacuum state.
4. Check the oil level of the vacuum pump frequently, and inject No. 1 vacuum pump oil every time. Open the valve under the storage cylinder and release the oil in time to avoid normal use next time.
When the vacuum oil filter is filtering, a person is needed to scrape the scum. After using for a period of time, the filter cloth needs to be cleaned to avoid blocking the mesh and the oil can not be filtered.

