Hydraulic Press Structure

1. The fuselage adopts the traditional bow structure, which is similar to the traditional mechanical punching machine. The structure is simple and compact, the floor space is small, and the operation is convenient.

2. The main cylinder is a piston type cylinder with a quick cylinder inside, which can realize high speed down and slow speed suppression. Increase productivity.

3. The oil cylinder is of the upper oil cylinder type, and the punching slider is pressed from top to bottom when working, the lower mold is stationary, and the upper mold is pressed.

4. The upper part of the fuselage is equipped with precision positioning device, mechanical dead limit, and servo adjustment device.

5. The precision positioning device is driven by a servo motor. The positioning accuracy is 0.01mm.

6. The electrical system adopts PLC+servo system+touch screen+proportional drive, with proportional hydraulic system, and issues instructions according to the process requirements to complete the process cycle of the machine.

7. Friendly human-machine interface, free access to 200 sets of parameter programs.

8. The position is positioned by the electronic ruler, and the stroke position can be set arbitrarily. The high precision positioning adopts the mechanical dead limit, the positioning accuracy is theoretically ±0.01mm, and the actual positioning accuracy is 0.01-0.02mm.

9. The pressure is detected by the pressure sensor, and the machine pressure can be set arbitrarily.

10. The mobile workbench automatically feeds.