Knowledge

Tips on the service life of oil press

The working principle of the hydraulic press is nothing more than the use of high-pressure propulsion, high-pressure extrusion and other working principles. Therefore, the wear of parts is a mechanical equipment that needs attention during use. Good operating habits should be developed during normal use. Every time the machine performs preheating, idling running-in, and gradual feeding operations before the machine works, the press chamber is suddenly heated or heated, and the pressure suddenly rises. At the end of each operation, please turn the machine upside down or clean the raw materials, and clean the pressure rod, oil pan and other parts.

 

Oil press price

 

The daily maintenance and the close cooperation of the parts of the hydraulic press ensure a long service life.

1. When the cake or oiling is abnormal, the screw shaft should be extruded, and the wear of the screw, press and cake nozzle should be checked, and the worn parts should be replaced in time.

2. Regularly check the power interface of the hydraulic press, the heating coil and the switchboard, and pay attention to the power consumption.

3. The oil compressor should be checked for lubrication every 50 hours. There should be no shortage of oil in the gearbox, no shortage of oil in the vacuum pump, and dead ends of the vacuum pump. The adjustment screw hole of each shift should be filled with butter in the inner bearing of the adjustment screw of the compression screw shaft. Dry grinding is strictly prohibited.


You Might Also Like

Send Inquiry