How To Increase The Oil Output Rate Of The Screw Press?

How to increase the oil output rate of the screw press?

The main factor affecting the oil yield of the screw press is the moisture of the crop, followed by the temperature of the crop, and the customer's operating experience, etc., these three aspects can be well coordinated.

Other reasons affecting output

① The cleanliness of the raw materials is not enough, and sand and impurities enter the squeeze chamber.

Screw press

②The screw shaft or cake outlet is not smooth, which affects the feed and cake. It can be polished with a grinding wheel, or materials with a large friction coefficient such as chaff can be mixed into the cake. , Polish the mouth of the cake.

③ If the rotating speed of the screw shaft is too high or too low, the rotating speed should be adjusted until it meets the regulations.

④The screw shaft is polished, and the parts should be replaced.

These are some issues that everyone should pay attention to. It is necessary to carefully observe the operation of the oil press when operating the oil press.

The screw press must be inspected before use. The part of the lubricating oil should be coated with lubricating oil, which not only improves the work efficiency and oil output rate, but also reduces the friction of the parts and reduces the oil press. Replacement frequency of machine wearing parts.

Before pressing the oil crops with a screw press, use a steaming pan to fry them, which can greatly improve the oil yield of oil crops, such as sesame and castor seeds, sunflower seeds, etc. These are oil crops with higher oil content For example, soybeans, the content of soybeans in China is relatively low, and general users of screw presses will use cold pressing to squeeze.