The Benefits Of Supporting The Use Of Oil Pressing Equipment
Oil press under normal circumstances, many customers know to ask about refining, whether it is a large oil factory or a small oil press are more enthusiastic about this. Some customers of type 100 oil pressing equipment ask me what type of refiner I should support. Whenever I meet such customers, manufacturers are very headache, because the daily processing capacity of type 100 machine is up to 1.5 tons of material, and according to the calculation of peanut oil output is a little more than half a ton. You should know that the minimum output of equipment equipped with refining is more than 1 ton.
In addition, some customers invest in the refining line at one time and buy all the equipment at one time. When purchasing the refining line, we must pay attention to the oil pressing production line. If it is 5 tons, then the maximum output of the refining line equipped with 2.5 tons will be enough. The amount of oil extracted and refined is usually 1/2, or less, because we cannot squeeze all the raw materials into oil at a ratio of 1.1. This is a problem to pay attention to, especially beginners must know whether their situation is suitable for the refining line.
Also note that the better the refining line, the more sections, this is not necessary, this must be clear with everyone so as not to spend more money in vain. Different cooking oils need different refining stages. For example, peanut oil can become national grade 1 oil as long as it is decolorized and deodorized, while rapeseed must go through a dephosphorization and degreasing process. Cottonseed oil needs to be demildewed, and corn oil only needs to be decolorized, desuglified and degummed. Different oil processing methods are different, and some sections are meaningless. When we buy a full set of oil pressing equipment and refining equipment, we must make clear our purpose and come up with a procurement plan suitable for our production needs.

