What Are The Amount Of Immersion in The Immersion Equipment, What Is The Amount Of Residual Oil From The Meal?

(1) Material embryo. Whether the thickness of the raw material is controlled below 0.3mm, whether the moisture is below 10%, whether the steam is thorough, whether there is "white heart", and how the powder is.

(2) Soaking temperature. Properly improving the immersion temperature can promote the diffusion effect, enhance the molecular heat movement, and reduce the viscosity of oil and solvents. Therefore, it can increase the leaching speed or reduce the remaining oil rate within the same immersion time.

Oil press equipment

(3) The time of contact with oil (soaking or spraying) of the solvent is immersion time. This depends on the speed of the extractor. The immersion time must ensure that the oil molecules have enough time to spread to the solvent, but the immersion time is too long and not economical. balance.

(4) The effect of solvent ratio and oil concentration. The solvent is small and the concentration of the mixed oil is too high. It cannot be achieved or partially achieved, and the amount of residual oil in dry powder increases. However, if the solvent is too large and the concentration of oil mixing is too low, it will increase the burden of evaporation system and affect the production capacity of the entire system.