Pressing process of new oil press
Pressing process of new oil press
The pressing process of the new oil press is three stages with three pressure heads. The pressing process is composed of a feed section and a pressure section.
One stage is the feed section. The material to be squeezed is squeezed in the feed section to remove air and a small amount of moisture. It is deformed and is muffin-like. Oil begins to flow. The high oil content material is compressed in the feed. The oil starts to flow at the first stage;
The second stage is the main pressure stage. Here is the stage where high pressure is formed and a large amount of oil is discharged. Because the volume of the press chamber is rapidly and regularly reduced, the material to be pressed is strongly squeezed, which will have more oil Outflow
The three stages are the cake-forming stage. When the cake is formed, it is almost integrally pushed forward, which will produce a larger compression resistance, which will still require a larger pressure to ensure that the oil is drained and will not be recycled. Will flow out of the oil pressing equipment;
The three stages constitute the pressing process of the new oil press. One of the oil output is relatively large, the first two sections have most of the oil, and the third section is a small amount of oil. After three stages, the oil in the oil is basically squeezed clean, and the residual oil rate is within the qualified range.
