Manufacturers Share The Maintenance Methods Of The New Oil Press

Many customers who bought machines from oil press manufacturers only listened to salespersons saying how good the performance of the new oil press is. After buying it and using it for a few years, they found that the machine had various minor problems. For this, we  oil press The manufacturer's joint production department and technical department have summed up the following, after we purchase the oil press, we will maintain its parts and increase the service life.

Maintenance method:

1. The concentration of the pressure oil in the oil pump of the oil press equipment should not be too high. It is easy to use rapeseed oil, soybean oil and peanut oil. It is forbidden to use gasoline, kerosene and other flammable fuels.

2. The fuel tank should be kept clean. Clean the fuel tank every 3 months or so (you can also replace the new oil according to your oil extraction operation) or take the oil out of the tank and filter it before use. Impurities in the oil will wear the oil pump and cause blockage of the oil circuit, affecting the operation of the oil press.

3. The oil press should be installed indoors as much as possible to prevent wind and rain from causing rust and cooking oil pollution.

4. When parked for a long time, the machine should be cleaned, oiled, and covered with a protective cover.